Installing a dependable motorcycle TPMS (Tire Pressure Monitoring System) is one of the smartest safety upgrades you can make for daily commuting or long-distance touring. Unlike a passenger car that has four wide tires to share the load, a motorcycle relies entirely on two small contact patches for braking stability, cornering grip, and predictable steering. Catching a slow nail puncture or a dropping pressure reading on your handlebars before the rear tire begins to wallow in a highway sweeper can prevent a roadside stranding or a dangerous blowout.

For several years, Garmin offered a proprietary Tire Pressure Monitor Sensor that paired directly with select Zumo navigators over an internal ANT wireless radio. Because Garmin discontinued those original sensors and removed native ANT tire-monitoring hardware from the Zumo XT, Zumo XT2, and Zumo XT3 generations, riders today need to match the right monitoring system to their specific cockpit setup. Our recommendations draw on 20 years of experience selling and evaluating GPS devices and mounting equipment, supported by product research and technical analysis.
Quick answer: Native Garmin TPMS sensors are discontinued and only work with legacy Zumo 390LM, 395LM, 590LM, and 595LM units. If you ride with a Garmin Zumo XT, XT2, XT3, or another modern navigator, choose either a Bluetooth phone-linked system like the FOBO Bike 2 or Moman Motorcycle TPMS (which can forward phone alert banners to your Zumo screen and audio alerts to your headset) or a dedicated handlebar gauge like the SYKIK Rider SRTP300. Always install screw-on TPMS caps on rigid metal valve stems rather than rubber stems.
How a Motorcycle Tire Pressure Monitoring System Works
Aftermarket motorcycle tire pressure monitoring systems fall into two mechanical categories: external valve-cap sensors and internal rim-mounted sensors. External screw-on sensors are by far the most popular choice for DIY riders because they thread directly onto your existing valve stems in minutes without breaking the tire bead or rebalancing the wheel from scratch. Inside each weatherproof cap is a miniature pressure transducer, a temperature thermistor, a motion switch, a coin-cell battery, and a wireless radio transmitter.
When you thread an external sensor onto the valve stem, a center pin depresses the Schrader valve core slightly so the chamber inside the cap equalizes with the air pressure inside the tire. An internal rubber O-ring seals the threads to prevent air from escaping, while a reverse-threaded anti-theft lock nut tightens upward against the base of the cap so vibration or curious passersby cannot unscrew the sensor by hand.
To conserve battery power while the motorcycle is parked in your garage, external motorcycle TPMS caps use an internal motion or accelerometer switch. When the wheels stop turning for several minutes, the sensors enter a low-power sleep state. Once you roll the motorcycle out of the driveway and reach walking or neighborhood speed, the motion switch wakes the transmitter and begins broadcasting live PSI and temperature data to your smartphone app or handlebar receiver.
Important: Never install external screw-on TPMS sensors (including Garmin, FOBO, SYKIK, or Moman caps) onto standard flexible rubber valve stems. At highway speeds, the added weight of the sensor cap creates strong centrifugal force that bends a rubber stem outward, which can tear the rubber base against the rim hole and cause sudden, total tire deflation. Always equip your wheels with rigid metal (aluminum or steel) valve stems before threading on external TPMS caps.
Best Motorcycle TPMS Systems for Modern Riders
Whether you want a zero-clutter Bluetooth setup that works through your phone and helmet headset or a dedicated weatherproof gauge clamped next to your motorcycle GPS mount, the systems below cover every riding style.
| Motorcycle TPMS Model | Display & Radio Type | Power / Sensor Battery | Best Fit |
|---|---|---|---|
| FOBO Bike 2 | Bluetooth 5.0 to iOS/Android phone app & smart notifications | Replaceable CR1632 battery (up to 1 year) | Riders wanting zero handlebar clutter, parked garage readings, and Zumo notification alerts |
| SYKIK Rider SRTP300 | 1.5-inch waterproof multicolor handlebar or dash LCD | USB rechargeable display; replaceable CR1632 sensor batteries | Riders who want a compact, always-visible PSI and temperature gauge on the bars |
| Moman Motorcycle TPMS | Wireless Bluetooth caps to iOS/Android app with voice & temperature alarms | Replaceable button cell batteries (1 to 2 years, motion-activated sleep) | Riders wanting an affordable, compact IP67 Bluetooth sensor pair with QR-code app binding |
| Garmin TPMS (010-11997-00) | Proprietary ANT wireless link to legacy Zumo screen | Replaceable BR1225 3V battery (up to 18 months) | Existing owners of Garmin Zumo 390LM, 395LM, 590LM, and 595LM only |
1. FOBO Bike 2 Smart Bluetooth TPMS (Best for Phone & Zumo XT3 Alerts)
If your handlebars are already occupied by a GPS cradle, phone mount, or auxiliary light switches, the FOBO Bike 2 is the cleanest motorcycle TPMS on the market because it requires no separate cockpit display at all. The two ultralight external sensors (weighing just 7.6 grams each with the battery installed) use Bluetooth 5.0 to communicate directly with the free FOBO Bike 2 app on your iOS or Android smartphone.
Unlike many motion-switched sensors that only report pressure after you start rolling down the street, FOBO Bike 2 sensors remain accessible via low-energy Bluetooth even while the bike is parked in the garage. That means you can open the phone app before putting on your helmet to check front and rear PSI and tire temperature, topping off air before you ever leave the driveway. You can configure custom upper and lower pressure limits (up to 116 PSI maximum range), track slow and fast leaks, and manage multiple motorcycles inside a single account.
When a tire drops below your preset threshold while riding, the FOBO app triggers an immediate audio alarm in your motorcycle Bluetooth helmet headset and posts a high-priority banner alert on your phone. If your phone is paired to a modern Garmin Zumo with smart notifications enabled, that warning banner can also pop up directly on your GPS screen. Each IP57 water- and dust-resistant sensor runs for up to one year on a user-replaceable CR1632 coin cell and includes anti-theft lock nuts and wrenches.
2. SYKIK Rider SRTP300 Wireless Motorcycle TPMS (Best Dedicated Handlebar Display)
Many riders prefer a dedicated gauge that shows live front and rear PSI at a glance without unlocking a smartphone or relying on background phone apps. Backed by California-based support, the SYKIK Rider SRTP300 is a proven favorite among touring and sport-touring riders because its compact, water-resistant 1.5-inch multicolor monitor (measuring roughly 2 inches by 2 inches square) tucks neatly onto any round handlebar up to 1.3 inches in diameter or sticks to a flat fairing dash pad using the included adhesive mount.
The SRTP300 comes pre-paired from the factory with two external waterproof valve caps, anti-theft jam nuts, and a battery wrench. On the road, the screen continuously displays front and rear tire pressures (selectable in PSI or Bar) alongside tire temperatures (Fahrenheit or Celsius). You can set independent high- and low-pressure alarms for the front and rear wheels (with factory defaults set at 27 PSI low, 45 PSI high, and 150 degrees Fahrenheit), so a touring bike running higher rear pressure is monitored accurately.
If pressure drops or temperature spikes, the display flashes red and sounds an audible warning beep. The monitor’s internal rechargeable lithium battery lasts roughly six to nine months per USB charge (or can be topped off from a motorcycle USB port), while the motion-activated wheel sensors run for roughly a year on replaceable CR1632 coin batteries.
3. Moman Wireless Bluetooth Motorcycle TPMS Sensors (Best Value Bluetooth Kit)
For riders who want smartphone-based tire pressure and temperature alerts without paying a premium price, the Moman Motorcycle Tire Pressure Monitoring System (model MP-TPMS-XCY-BK) delivers a compact, weatherproof two-sensor Bluetooth kit that installs in under a minute. Constructed from rugged ABS and polycarbonate with IP67 water resistance, each miniature cap threads onto your valve stem against a reverse-threaded anti-theft washer using the included metal wrench.
Instead of requiring a separate handlebar receiver screen, the Moman sensors bind directly to the companion iOS and Android smartphone app by scanning the QR code or entering the sensor ID printed on each cap. Once paired, the app monitors four critical safety thresholds: high tire pressure, low tire pressure, high tire temperature, and low sensor battery voltage. If an abnormal reading is detected on the road, the app triggers immediate voice and notification alarms so you can hear the warning through your helmet audio setup.
To maximize battery life across multi-season use, Moman’s caps rely on centrifugal motion-activated monitoring. When the motorcycle is parked and stationary, the sensors drop into a zero-transmission sleep state so they do not drain their replaceable button cells (which last roughly one to two years). Once you pull out of the driveway and ride for a few minutes, the centrifugal switch wakes the transmitters to refresh your live pressure and temperature readings.
Does Garmin TPMS Work with the Garmin Zumo XT, XT2, or XT3?
No. One of the most common questions from riders upgrading an older cockpit is whether their existing Garmin Tire Pressure Monitor Sensors will pair with a new Garmin Zumo XT, Zumo XT2, or Garmin Zumo XT3. Garmin removed the internal ANT wireless receiver required for TPMS starting with the Zumo 396 LMT-S and kept it out of the entire Zumo XT family, including both the 4.7-inch and 6-inch Zumo XT3 models.
Even though you cannot view a native tire-pressure gauge inside the Zumo XT3’s built-in apps menu, you can still receive low-pressure warnings on the Zumo screen by using a Bluetooth TPMS kit like the FOBO Bike 2 or Moman Bluetooth TPMS:
- Install the Bluetooth TPMS sensors on metal valve stems and pair them to the companion app on your smartphone.
- Pair your smartphone to your Garmin Zumo XT3 (via the Garmin Tread app) or original Zumo XT (via the Garmin Drive app) and enable Smart Notifications in the GPS settings.
- Leave the TPMS app running in the background on your phone. If either tire crosses your low-pressure or high-temperature threshold, the app generates a smartphone notification that forwards automatically to the Zumo display and plays an alert tone through your paired Bluetooth headset.
If you are currently comparing navigators for a new cockpit build, see our full Garmin Zumo XT3 review and our motorcycle GPS buying guide for a complete breakdown of current display sizes and connectivity features.
Complete Guide to the Legacy Garmin Tire Pressure Monitor Sensor (010-11997-00)
If you own an older compatible Zumo or are buying new-old-stock sensors to complete a legacy touring setup, the original Tire Pressure Monitor Sensor from Garmin (part number 010-11997-00, sold individually per wheel) remains a well-integrated system once you understand its hardware requirements and battery quirks.
Compatible Garmin Zumo Models
Native Garmin TPMS support is limited strictly to four legacy motorcycle navigators that contain the required internal ANT receiver:
- Garmin Zumo 390LM
- Garmin Zumo 395LM
- Garmin Zumo 590LM
- Garmin Zumo 595LM (which also uses the legacy Garmin Smartphone Link app for phone data)
You can pair up to four Garmin TPMS caps to a single compatible Zumo at one time. While Garmin explicitly designed these sensors for motorcycles rather than passenger cars, the four-sensor capacity allows riders towing a two-wheel motorcycle trailer or riding a trike or sidecar rig to monitor every wheel on the screen.
How Garmin TPMS Sleep Mode and BR1225 Batteries Work
Each Garmin TPMS valve cap houses an integrated pressure sensor, a motion detector, and a replaceable coin battery. When you shut off your Garmin Zumo and park the motorcycle, the valve caps enter a low-power sleep mode to conserve energy. When you start riding again, the motion sensor wakes the cap up, though it typically takes up to 30 seconds of wheel rotation for the sensors to wake and reconnect to the paired Zumo. Under normal riding schedules, this sleep behavior delivers a battery life approaching 18 months.
The Garmin TPMS system requires replaceable BR1225 3V lithium coin batteries. If you purchase a remaining new-old-stock Garmin TPMS sensor today, the original factory battery inside the package has almost certainly expired on the shelf and should be replaced before you attempt to pair the unit. Always choose a reputable brand such as the Panasonic BR1225 battery rather than a standard CR1225 cell, as the BR1225 poly-carbonmonofluoride chemistry maintains stable voltage across the wider operating temperatures experienced near hot motorcycle brake rotors.
How to Pair and Monitor Garmin TPMS Sensors
Each tire uses a separate valve cap that communicates with the Zumo over ANT, a short-range wireless protocol similar to Bluetooth. Once paired, the sensor stays linked to that specific wheel position until you unpair it. Follow this exact sequence so the Zumo recognizes each sensor on the first try:
- Wait to thread the caps onto the bike: Initial pairing is performed with the TPMS cap held right next to the Garmin Zumo display, so do not screw the sensors onto your valve stems before opening the menu.
- Open the Tire Pressure app: On your compatible Garmin Zumo, tap Apps > Tire Pressure.
- Select the wheel position: The Zumo screen displays a silhouette of a motorcycle. Tap the specific tire (Front or Rear) that you are about to pair.
- Insert the battery and pair: Unscrew the Garmin TPMS cap housing, verify that a fresh BR1225 battery is installed with the positive (+) side facing the cap cover, and screw the housing closed while holding it within a few inches of the Zumo until the GPS confirms pairing.
- Apply the numbered stickers: Garmin includes small numerical stickers (1 through 4) with each sensor. Stick the matching number onto the cap immediately after pairing so you never mix up the front and rear caps during a tire change.
- Thread onto metal valve stems and set thresholds: Thread the lock nut and sensor onto your metal valve stem, tighten the jam nut against the base of the cap, and enter your custom low-pressure PSI warning thresholds on the Zumo screen.
Once active, the Garmin Zumo Tire Pressure screen shows the live PSI reading next to each wheel on the motorcycle silhouette. Beyond triggering a visual pop-up alert if pressure drops below your custom threshold, the Zumo also logs tire pressure trends over time. Reviewing that pressure history makes it easy to spot a gradual 1-to-2 PSI slow leak over a multi-day tour so you can repair the tire before it goes flat on the highway.
Metal Valve Stems and Wheel Balancing Tips
Installing any external motorcycle TPMS cap properly requires paying attention to three mechanical details on your wheels:
- Verify rigid metal valve stems: Check your rims before ordering. Many motorcycles leave the factory with snap-in black rubber valve stems. Have your tire shop install bolt-in aluminum or steel valve stems (8.3 mm or 11.3 mm rim hole size, depending on your wheels) at your next tire change before installing TPMS caps.
- Consider 90-degree angled metal stems: On motorcycles with large dual front brake rotors, tight spoke clearance, or small scooter wheels, threading a 20 mm-wide TPMS sensor onto a straight vertical valve stem can be awkward and may bring the cap dangerously close to the brake caliper. Installing 90-degree angled bolt-in aluminum valve stems points the valve outward toward the side of the rim, guaranteeing caliper clearance and making air fill-ups much easier. (Note: always check that an angled stem places the sensor where it clears the fork leg and caliper throughout full wheel rotation.)
- Check wheel balance and O-ring seals: While modern sensors like the FOBO Bike 2 and Moman Bluetooth caps are compact and lightweight, legacy Garmin sensors and larger external TPMS caps are heavier. When having new tires mounted, leave your TPMS caps threaded onto the metal stems while the technician balances the wheels so the sensor weight is completely offset. Periodically inspect the small rubber O-ring inside the cap threads and apply a tiny dab of silicone grease so it seals cleanly without sticking.
Frequently Asked Questions
Why does my motorcycle TPMS read higher pressure while riding?
Tire pressure specifications in your motorcycle owner’s manual are always “cold” inflation numbers measured before the bike has been ridden. As you ride at highway speed, carcass flexing and pavement friction heat the air inside the tire, causing pressure to rise naturally by 3 to 6 PSI (roughly 1 PSI for every 10 degrees Fahrenheit of temperature increase). Never bleed air out of a hot tire on the side of the road just because the live TPMS reading has risen above your cold baseline; set your high-pressure alarm threshold roughly 20% to 25% above your cold PSI setting to account for normal thermal expansion.
Do external motorcycle TPMS sensors leak air if the cap gets damaged?
External TPMS caps depress the top of the Schrader valve core slightly to read internal tire pressure, relying on an internal rubber washer or O-ring inside the cap to seal the stem. As long as the internal O-ring is intact and the cap is snugged against a metal valve stem, they hold air reliably. However, you should always keep your standard valve caps in your tank bag or tool kit so you can remove a damaged TPMS sensor and cap the stem normally if an O-ring ever wears out.
Can I use Garmin TPMS and a Bluetooth headset at the same time?
Yes. On compatible legacy navigators (Zumo 390LM, 395LM, 590LM, and 595LM), the Garmin TPMS sensors communicate over an independent ANT wireless channel while your phone and helmet communicator connect over Bluetooth. The two wireless protocols operate simultaneously without interfering with spoken turn-by-turn directions or music streaming.
Why is my Garmin TPMS sensor not waking up or pairing?
In almost every case, a Garmin TPMS cap that fails to pair or stops reporting after winter storage has a depleted BR1225 battery. Remember that the sensors also go to sleep when stationary and require up to 30 seconds of wheel movement to wake up and display PSI numbers on the Zumo screen. If a fresh Panasonic BR1225 battery does not restore the link, delete the sensor from the Zumo’s Tire Pressure menu and re-pair it close to the display before threading it back onto the tire.
Bottom Line
Adding a motorcycle TPMS gives you real-time visibility into your tires’ health every time you pull out of the driveway. If you ride with a modern Garmin Zumo XT3, XT2, or XT, pair a Bluetooth FOBO Bike 2 or Moman Motorcycle TPMS kit to your phone for smart notification alerts and zero handlebar clutter, or clamp a dedicated SYKIK Rider SRTP300 display to your bars for an always-on cockpit gauge. And if you are maintaining a classic Zumo 390LM, 395LM, 590LM, or 595LM with original Garmin TPMS caps, keep a spare pack of Panasonic BR1225 batteries on hand and always mount your sensors on rigid metal valve stems.